Commands¶

Overview¶

Object name: CMD

Show¶

In order to list available commands, use SHOW action:

[root@centreon ~]# ./centreon -u admin -p centreon -o CMD -a show
id;name;type;line
1;check-ping;check;$USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$
2;check_dummy;check;$USER1$/check_dummy -o $ARG1$ -s $ARG2$
[...]

Columns are the following:

Column	Description
Command ID
Command name
Command type	check, notif or misc
Command line	System command line that will be run on execution

Add¶

In order to add a command use ADD action:

[root@centreon ~]# ./centreon -u admin -p centreon -o CMD -a ADD -v 'check-host-alive;check;$USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 1'

Required columns are the following:

Column	Description
Command name
Command type	check, notif or misc
Command line	System command line that will be run on execution

Note

You need to generate your configuration file and restart monitoring engine in order to apply changes.

Del¶

If you want to remove a command use DEL action:

[root@centreon ~]# ./centreon -u admin -p centreon -o CMD -a del -v 'check-host-alive'

Note

You need to generate your configuration file and restart monitoring engine in order to apply changes.

Setparam¶

If you want to change a specific parameters for a command, use the SETPARAM command:

[root@centreon ~]# ./centreon -u admin -p centreon -o CMD -a setparam -v 'check-host-alive;type;notif'
[root@centreon ~]# ./centreon -u admin -p centreon -o CMD -a setparam -v 'check-host-alive;name;check-host-alive2'

Parameters that you can change are the following:

Parameter	Description
name	Name of command
line	Command line
type	check, notif, misc
graph	Graph template applied on command
example	Example of arguments (i.e: !80!90)
comment	Comments regarding the command

Note

You need to generate your configuration file and restart monitoring engine in order to apply changes.